Each of these nails must be installed loose (leaving a dime size thickness). At the end of installing each panel, be sure the panel can slide up and down easily. Insulated vinyl siding features a layer of foam insulation bonded to the back of the panels. This additional layer improves the home’s energy efficiency and increases the siding’s rigidity and impact resistance. While more expensive than standard vinyl siding, insulated options can lead to long-term energy savings and improved comfort, making it appealing to homeowners looking for energy efficiency. Featuring over 2,000 colors and styles of vinyl, insulated, and PVC siding— Royal Build Products offers siding for every home aesthetic.
Your contractor might even find out that the sheathing underneath the old siding has deteriorated. If the sheathing is damaged or unusable for any reason, it will need to be replaced before new siding can be installed. While the size of your home is significant in any project, it is a key factor in your siding. The terrain and number of stories will impact your final quote and installation time.
NAIL FIN TRIM – POCKET SCREW JOINERY FOR WINDOWS
SIDING can be painted utilizing “vinyl-safe” paint of LRV 54 or lower. Prior to painting, make sure that the surface area is properly cleaned. Please refer to the paint manufacturers’ specifications & follow their instructions for paint applications. Use moderate downward hand pressure inserting the groove of SIDING onto the tongue of starter strip as well as the previously fastened course.
Should I Get Fireproof Siding?
- Any reputable siding contractor will be willing and able to answer the following questions.
- If you’re attaching aluminum trim pieces, be sure to use aluminum or stainless steel fasteners.
- Flashing is an important line of defense in controlling moisture in wall assemblies.
- Galvanized nails are covered with a zinc coating that improves their rust and corrosion resistance.
- As mentioned, vinyl panels should be able to move slightly after installation to accommodate contraction and expansion.
- You’ll want a pair of tin snips or something to hand cut the vinyl siding with.
- First, they will powerwash all of the walls to make sure they are cleaned off.
A strong foundation at this stage prevents common issues like misalignment, gaps, and buckling. To cut vinyl siding, you can use a circular saw, tin snips or a utility knife. When using a power saw, install a fine-toothed blade (plywood) backward and cut slowly. With tin snips, don’t close the blades completely after cutting. To use a utility knife, score the vinyl with medium pressure while it’s face up and then snap it in half.
The first “plank” of vinyl siding fits snugly into the starter strip. The vinyl siding is then installed with both raw ends covered by either the corner or J-trim. It’s important to start vinyl siding at the bottom of the wall and work your way up. First, make sure you review the Hardie® Plank lap siding installation instructions, which contain the information you need for proper installation. To help you get started, we’d recommend checking out this helpful video, which shows you how to cut and install starter strips and how to stagger lap siding for improved appearance. Siding boards should be attached to the furring strips with stainless steel, headed, ring-shank siding nails with a diamond tip, hand nailed or fired from a pneumatic nailer.
The Look of Real Wood. The Performance of Something Better.
- The seams will lay flat with each other and you will be able to drop in the foam backer and secure the panel to the wall.
- Continue installing your siding one row at a time, always beginning at the back of the home and working your way to the front.
- Despite its popularity, vinyl siding has some concerns and misconceptions to be aware of.
- As our products come in a wide range of patterns and colors, we believe we can always find a look that works perfectly for every project.
- This sensitivity makes it easier for a house fire to jump to neighboring houses in comparison to materials such as brick, metal or masonry.
Installing vinyl siding is a big project, but it is accessible to people who have basic carpentry skills. And there’s a powerful cost incentive to handle an installation yourself. According to HomeAdvisor, the average vinyl siding installation cost is $11,136, and most homeowners pay between $6,070 and $16,405 for an entire house. Install your inside corner posts at the building’s existing corners, beginning three-quarters of an inch below the starter strip’s bottom. Nail them to the adjoining walls, placing nails at the top of the uppermost nailing slots and continuing down every eight to 12 inches. Installing utility trim is vital for securing the last piece of siding and accommodating expansion and contraction.
The Superior Protection Provided by Our UltraShield Technology
To keep this last cut row from collapsing against the house, nail a 3-inch strip of 1/2-inch plywood against the J-channel to hold it out. Is there a tradeoff in terms of how the siding makes a home look? On the other hand, many homeowners are perfectly at ease with the change in the home’s appearance given the fact that vinyl siding only needs yearly cleaning and never needs to be painted. Begin this process at the back corner of your home, working towards the front as you go. Leaving a quarter inch of space where each panel butts the corner post, snap the panel bottom into a starter strip and nail it into the wall.
LAP SIDING WITH RIGIDSTACK™ SIDING & H-MOLDINGS
The siding installation process and timeline can vary depending on factors such as the square footage of the project, the type of siding material used, and weather conditions. Ask your siding contractor for a timeline based on your specific job. Follow by nailing window and door trim around any exterior doors and sheath the first few feet of the walls with insulation.
Siding Installation Contractors
In fact, unscathed vinyl siding can often be removed and reused if it’s done right. Thermal bridging is the process of energy moving through or across an object that is more conductive than the materials that surround it. The conductive material—metal and wood—allow the heat to pass right through.
Step 1: Gather Your Tools and Materials ⚒️
New siding materials are likely to be delivered the day prior to the start of installation. Warranties for vinyl siding can range from years depending on the thickness, with many manufacturers now offering lifetime warranties that can be transferred to the next owner. Vinyl siding is resistant to heat, cold, and moisture, and it’s certified to withstand winds up to 110 miles per hour.
What is the easiest siding to install DIY?
Watch the video below for full instructions on installing your corner cap. For your second piece of steel siding on the same row you just started, again, take out the foam backer from the panel to make it easier for installation. You will notice a notch out at the top and bottom of the panel. This allows the panels to overlap each other about a half of an inch. The seams will lay flat with each other and you will be able to drop in the foam backer and secure the panel to the wall.
Covering Old Siding
You may use rigid-foam backing, but plywood makes a stronger support. Install the siding adjacent to the deck conventionally, and press the cut section into the J-channel. However, the project becomes relatively easy once you have the necessary experience and tools. Please ensure you gather your siding and all necessary tools before starting. If you don’t own all these tools, you can purchase them at most home improvement stores.
Allowing for Expansion and Contraction
Use the wood furring strips and install the furring vertically first. Then install another set of furring strips horizontally on top of the first set. Taking on a home siding project yourself is no small feat—and we respect the drive it takes to do it right. Whether you’re motivated by budget, curiosity, or the satisfaction of a hands-on project, learning how to install siding properly is essential to avoid expensive mistakes. Choosing the right siding material depends on several factors, including your budget, aesthetic preferences, maintenance willingness, and the climate in your area. Vinyl siding is a versatile and low-maintenance option, while James Hardie siding offers enhanced durability and resistance to fire and pests.
Advanced Techniques: Complex Angles and Corners
Meanwhile, we prep your home for minimal heat loss during the installation process. The grand finale of how to install siding on a house is as satisfying as watching the credits roll after an amazing movie. Installing finishing trim elevates the look to another level of professionalism and ensures those edges are sealed against the elements. Now you know all that goes into the siding installation process from the pre-construction conference to final inspections. The panels are nailed into the OSB with hot-dipped galvanized coil nails or 16 gauge finish nails. These nails are resistant to rust and are sturdy against harsh weather conditions, so they will keep your siding in place.
Siding Success—A Smooth Path to a Perfect Home Exterior
If there is old siding on the house, it must be removed completely to provide a solid base for the new installation. Leaving damaged or uneven materials underneath can cause siding panels to shift, warp, or become misaligned. To prepare for siding installation, it is important to create a flat and even wall surface. When building a new structure, it is recommended to use a water-resistive barrier such as house wrap or felt paper. It is also important to verify with local building codes to determine if any additional requirements are necessary.
SHOP SIDING BY COLOR
A FACTORY FINISH ensures a lasting, higher quality job than … Finally, when you meet the soffit at the top, you need to do a few things to ensure a flush fit. Most siding systems will come with every single thing you need, but just in case, here’s an itemized list of everything you’ll need to install your new siding. But, this is where the magic of the Siding Calculator comes in. All you need to do is plug in your house dimensions (don’t worry, no one’s judging if you round up a bit.), and you’ll get an instant estimate. Southwest Exteriors installs siding under the James Hardie best practices, and we want to ensure you that our work meets the standards of those best practices.
- After the furring strips are installed, fill the top and bottom areas between the strips with the venting material per their manufacturer’s instructions.
- While vinyl siding is low-maintenance, some care is required to keep it looking its best and functioning properly.
- By working with a certified installer like Premier, you can trust your wood siding will be expertly installed to stand the test of time.
- Explore our comprehensive service offerings to enhance and protect every aspect of your home.
- If eaves troughs (rain gutters) are used, the flashing edge also helps to direct the water into troughs.
- Problems can also occur in very low temperatures during installation.
Using J-channel and utility trim to secure siding around obstacles will provide a clean and polished appearance. Install J-channel around windows, doors, and other openings by nailing it to the wall, leaving a small gap for expansion. Although the installation of soffit and fascia can be challenging, mastering these aspects will result in a refined James Hardie siding and professional look for your vinyl siding project. Preformed eaves flashing/drip edge should be installed under the starter course of the shingle roofing. If eaves troughs (rain gutters) are used, the flashing edge also helps to direct the water into troughs. Fascia flashing protects both the soffit and the fascia board, and provides a drip edge at the bottom edge to direct water away from the building.
Will you remove my old siding before installing new siding?
Smart Exteriors is Kansas City’s top siding company, installing quality siding, windows, roofing, gutters, and more. Once your installation is scheduled, your siding contractor will order materials, as well as a dumpster to cart away debris. These are usually delivered to your property a day or two before the installation. Make sure the siding has the versatility to meet the varied needs of your specific project. Correct Overlapping and Joint Placement – Overlapping sections of siding should follow the manufacturer’s guidelines to ensure proper drainage. Joints should be staggered and sealed properly to minimize water infiltration.
The crew will apply caulking, sealants, and paint or stain as needed to enhance aesthetics, protect against weathering, and improve energy efficiency. At RJW Exteriors, we offer customizable color, texture, and finish options to complement your home’s style. When the installation crew arrives, the first task will be to remove the old siding, trim, and accessories, ensuring that any damaged or rotted sections are replaced or repaired. Before proceeding with the installation, they may need to address any structural issues, moisture damage, or insect infestations. According to RISE, flash as needed to direct all incidental water that gets behind the siding to drainage points away from the sheathing, preferably to the ground. Behind the faucet mounting plate, install 1/2-inch plywood in place of insulation board.